Popular

MEKNIC Dash Cam Hardwire Kit Review

Meknic is easy for you, and friendly and trusted also. Meknic is committed to providing each customer with the highest standard of quality products and good service. And the company is striving to keep developing our product list to bring you upgraded and optimized products!

The Meknic Dash Cam Hardwire Kit allows you to install your In-Car Camera permanently into your vehicle. This Dash Cam hardwire kit is a simple “plug and play” solution to hardwire any mini USB car camera – dash cam front and rear into your car and no longer require a car cigarette lighter socket.

The box contains all the components required to easily connect the power supply directly to a fuse box of any vehicle that uses either standard ATO/C fuses OR more miniature ATM fuses, which covers most vehicles.

You can install it in less than a minute. Nearly less electrical expertise is required.

Remove a fuse from the fuse box, plug the required fuse “tap” cable supplied in the kit into the vehicle’s fuse box, and plug the displaced fuse into the top of the fuse tap cable. The car camera now has its power supply and no longer requires connecting to the car cigarette lighter socket. Now hide the included 3.5M 11.5FT car camera power cable, using your car interior trim, to the point of installing your car dashcam.

MEKNIC Dash Cam Hardwire Kit, Mini USB Hardwire Kit Fuse for Car Dashcam

$15.77
AmazonNoApi Amazon.com
Last update was on: November 26, 2022 12:56 am

What’s in the MEKNIC Dash Cam Hardwire Kit Box?

  • 1pcs 3.5M 11.5FT Meknic dash cam hardwire kit
  • Mini/LP ACN Add-A-Circuit Fuse Cable (Fuse Included)
  • Mini ACS Add-A-Circuit Fuse Cable(Fuse Included)
  • ATO ACU Add-A-Circuit Fuse Cable(Fuse Included)
  • Micro2 Add-A-Circuit Fuse Cable(Fuse Included)
  • 1pcs English Instruction Manual
  • 1pcs Anti-Interfere Magnetic Ring(Installed with cable)
  • 1pcs Installation Crowbar

Free Up Your Cigarette Socket

MEKNIC Dash Cam Hardwire Kit Review
MEKNIC Dash Cam Hardwire Kit Review

The Meknic car dash camera hardwire kit mini USB frees up the lighter, also known as the 12-volt power socket, for charging all your mobile gear, especially your phone, tablet, GPS device, or music player. Alternatively, if you happen to be a smoker, you won’t necessarily have to dislodge a plug from the socket or search for a lighter or matches to light up.

By using a hardwire kit, you can get rid of extra charging cables that use the cigarette lighter outlet, avoid excessive wires running across your headliner and into the charging port, and can utilize the parking surveillance or motion detection feature! And your dashcam will no longer monopolize the cigarette lighter for power.

About MEKNIC Dash Cam Hardwire Kit

MEKNIC Dash Cam Hardwire Kit Review
MEKNIC Dash Cam Hardwire Kit Review

Dash Cam Hardwire Kit for car DVR recorder that uses straight angle mini USB, 24-hour surveillance and protects against battery dying with this dash camera hardwire kit.

With Meknic Mini USB Hard Wire Kit, you don’t need a car cigarette lighter socket cable. Replace it with a permanent hidden cable Installation in minutes with little to no expertise required. Piggybacks from car fuse box socket.

With the Meknic dashcam, MINI USB hardwire kit, you can use a fuse tap or wire tap to draw power from fuse block or wire, with no damage to the original circuit of the car.

With low voltage protection function, protect car’s battery, 12V-11.2V (Cut Off Automatically) 24V-23.2V (Cut Off Automatically) to stop your car DVR working automatically with meknic mini USB dashcam hardwire kit.

Warranty: The company offers a one-year warranty, a 100% satisfaction guarantee, and a 30-day, hassle-free return policy for a meknic dash camera vehicle hard wire.
ColourBlack
Are Batteries IncludedNo
BrandMEKNIC
Item Dimensions LxWxH132 x 1.56 x 4.08 inches
Video Capture ResolutionPower For Dash Camera
Mounting TypeMagnetic Mount
MEKNIC Dash Cam Hardwire Kit Review
Important Notice:
Upgraded the 2nd Generation Dash Cam Hardwire Kit-You will get 1 x Mini USB to hardwire kit,1 x magnetic cord,4 x fuse tap cable, dashcam hardwire with the most popular fuse types will meet the applications for most car models;

Simple Installation and Cleaner Looking for This Dash Cam Install Kit

Meknic hardwires dash cam kit Installation in minutes with little to no expertise required. Piggybacks from the car fuse box socket, remove a fuse from the fuse box, plug the needed fuse “tap” cable supplied in the kit into the vehicles fuse box, and plug the displaced fuse into the top of the fuse tap cable. MEKNIC Dash Cam Hardwire Kit offered two different fuse cables to match other cars.

The car camera now has its power supply and no longer requires connecting to the car cigarette lighter socket. People getting in and out of the vehicle are less likely to snag an arm or leg on a loose cable. Also, with the wire hidden, people will be less aware that a camera is even installed.

Low Voltage & Car Battery Protection

Meknic Dash Cam Hardwire Kit for cars all come fused with a 12 -30V input and 5V 2A Output – making it the ideal solution for most in-car devices. This car dash camera hardwire kit has a low voltage protection function, protect the car’s battery, 12V-11.6V (Cut Off Automatically), 24V-23.5V(Cut Off Automatically) to stop your car DVR from working automatically, in this case, you do not need to worry about that you can not switch on the car’s engine if the dash camera run out of the car’s battery.

FM/AM Anti-Interfere Protection With this Meknic Dash Cam Hardwire kit

Meknic dual dash cam hardwire kit comes with Anti-interference Magnet Ring to reduce the radiation and prevent EMI interference, prevent impulse current interference when you plug or pull it out, protect you and your equipment better. There’s static or less RF interference when you’re listening to the radio. You can enjoy your favourite station without losing the signal with this Dash Cam Hardwire Kit.

Compatible With Most of the Car Dash Cam With Mini USB Input

This mirror dash cam hardwire kit is applied to almost all car mini USB devices (Voltage Between 12-30V), Convert the voltage from 12v to 5v, like dashcam, GPS navigator and radar detector, etc., and it comes with a 3.5M 11.5FT length cable, it matches most of the car installation.

24 Hour Parking Surveillance

The Meknic dash cams for cars hardwire kit has everything you need to charge your dashcam, cellphone, tablets, or other devices from your car’s battery even if your engine is off. It has low voltage protection so that you can use it to power your dash camera 24 hours a day without draining your battery to die.

You can record video in your car continuously without draining the battery of your vehicle. If you’re worried about someone breaking into your vehicle when it’s in the parking lot, you can rest assured that your dash camera will always be on and ready to record. The Dash Cam Hardwire Kit helps Parking Monitor and motion detection function work well, bringing your car 24 Hour Surveillance. Protects your vehicle’s battery from being drained by the dash camera.

MEKNIC Dash Cam Hardwire Kit Important Notice

You can use this Meknic dashcam wiring kit to power your Dash Camera in your car or truck, Sat Nav, Radar Detector in a non-obtrusive way just with Mini USB power input, without the need to have wires trailing all over your dash to plug a lead into the cigar lighter socket.

It connects the camera directly to the fuse box under the dashboard for continuous power from the vehicle’s battery. Your dash camera will always be powered, providing a watchful eye over your car when you’ve left it unattended with the ignition turned off. It enables you to hide the power lead along to the top of the windscreen and around the side of the pillar to under the dashboard. For 24-hour surveillance, hardwiring can’t be beaten.

MEKNIC Dash Cam Hardwire Kit, Mini USB Hardwire Kit Fuse for Car Dashcam
MEKNIC Dash Cam Hardwire Kit, Mini USB Hardwire Kit Fuse for Car Dashcam 12V-30V to 5V 2A Mini Dash Cam Hardwire with Battery Protection 11.5FT ,4 Fuse Tap Cables (Second Generation)
$15.77
Keeps your car organized (Connects your dashcam to the car battery)

Meknic Dash Cam Hardwire Kit Specifications:

> Input Voltage :12-30V input

> Output Voltage: DC5V

> Output Current: 2A(Exactly)

> It is compatible with any vehicle Car DVR with Mini USB socket for any dash cams.

> Perfect for 24H parking surveillance

> Keeps your Car organized (Connects your dashcam to the car battery)

> Works with the best dash cams on the market

> Get 24 hours of battery life

> Protects your car battery from dying

> Doesn’t permanently alter your car in any way Easily installs in any modern car

> Works with several portable electronics

> With low voltage protection function, protect car’s battery,12V-11.6V(Cut Off Automatically),24V-23.2V(Cut Off Automatically)

MEKNIC Dash Cam Hardwire Kit, Mini USB Hardwire Kit Fuse for Car Dashcam

Price: $15.77
as of November 26, 2022 12:56 am
BUY NOW
Amazon.com
Wait For A Price Drop

Price History

Statistics

Current Price $15.77 November 26, 2022
Highest Price $15.78 May 15, 2022
Lowest Price $15.76 May 26, 2022
Since May 15, 2022

Last price changes

$15.77 November 26, 2022
$15.76 November 15, 2022
$15.77 November 5, 2022
$15.76 October 26, 2022
$15.77 September 14, 2022
We will be happy to hear your thoughts

Leave a reply

REVIEWSHUB FOOTER STAMP

Reviews hub PRO is reader-supported. Some of the links on our website are affiliate links, and if you use them to make a purchase, we will earn a commission at no additional cost to you (none whatsoever). Well, this is how we manage to produce free content for you. Your support helps keep the site running. Learn more

Trending on Web

Recommended for you

Subscribe and receive notifications of new offers by email, Join with 30,647+ other subscribers now!

© 2016-2022 Connect Motive Media. All Rights Reserved

Reviews Hub PRO
Logo